INFO@MILLERDECALS.COM | 404-538-4836

Wrap FAQs

—credit to Wraps1

Every vehicle wrap is different, but there are a few steps you can take to help ensure that it goes as smoothly as possible before we perform our installation. By taking these steps, you keep your car or truck’s downtime to a minimum and get your newly wrapped vehicle on the road more quickly.

Step One: Wash and Dry Your Vehicle Thoroughly

We ask that you wash and dry your car the evening before your appointment and recommend store the vehicle in a garage overnight to keep it pristine. We highly recommend claybarring your vehicle. This will remove all impurities such as tree sap, tar, wax and overspray. Claybar can be purchased from auto parts store. Your car must be clean prior to installation.

Please avoid using any type of detailing products, wax, sprays, wipes and shines, such as Armor All® as these can interfere with application of your vinyl wrap. Chemical cleaners such as tar removers should be avoided as well.

The safest way to wash your vehicle before it’s wrapped is with soap and water. If you are unsure of commercial cleaning products used by your business, contact your Wraps1 representative.

If you are unable to clean your vehicle prior to wrapping, our cleaning fee will be applied. Contact us for current rates.

Step Two: Your Appointment

Wraps1 handles a high volume of vehicles and with the time involved in each installation, we ask that you arrive on-time for your appointment. If you’re running late, please contact us as quickly as you can so we can see if we can accommodate you. Otherwise, it may be necessary to reschedule your appointment.

Step Three: Vehicle Pick up & Storage

Our limited space and vehicle volume also means that we require our customers to arrive at the scheduled pick-up time for their vehicle.

Learn the importance and benefits of properly cleaning vehicle wraps and graphics from one of the experts.
By Molly Waters, Technical Specialist, Avery Dennison Graphics & Reflective Solutions

I thought this would be a good opportunity to explain why it is important as well as the benefits of cleaning vehicle wraps and graphics. I'll highlight the recommended cleaning methods as well as mention a couple of cleaners and waterless washes that Avery Dennison has found that work well.

Why Clean?

It surprises me how often I see or hear about wraps that are not cared for properly (or even cared for at all), especially when the wraps are being used to advertise a business. I've heard stories from wrap companies where they had to do a repair after 6 months and found that the grease pencil marks used by the installer for alignment were still on the vehicle. This is a very good indication that the owner / driver of the wrapped vehicle is not cleaning the wrap. Regular cleaning of a wrapped vehicle will not only help keep the wrap looking good for longer, it is also going to provide a better advertisement for a business. Just think, if someone doesn't care enough to clean their company vehicle what kind of work can you expect them to do for you?

In addition to keeping the car looking good, regular cleaning of a wrap is important because it can help prolong the life of the graphics. This is especially important in areas of high elevation and congested urban or industrial areas.

  • At high elevations, such as mountain areas, the UV damage is increased versus exposure at sea level. Because the air is thinner and there is less UV filtering, damage increases significantly.
  • In congested urban or industrial areas, increased smog, pollutants and particulates in the atmosphere will cause reduced durability on the horizontal areas of the wrap. The horizontal areas trap the chemicals on the surface of the material and the increased UV exposure results in shorter durability. These effects can be reduced with regular cleaning which will remove the pollutants and particulates that can damage the wrap. Applying an approved wax, after cleaning, will help to provide added UV protection, especially for the horizontal areas.

These effects can be reduced with regular cleaning which will remove the pollutants and particulates that can damage the wrap. Applying an approved wax, after cleaning, will help to provide added UV protection, especially for the horizontal areas.

How to Maintain Vehicle Wraps

How to clean?

The best way to clean a wrap is to do it the old fashioned way, by hand with a mild detergent and water. Going through an automatic wash with just spray is acceptable if there is no other way to clean the vehicle. I recommend skipping the wax option at the car wash to avoid wax that contains petroleum distillate, which can damage the wrap. The automated brush wash is an absolute no-no. The brushes may catch the edge of the decal or graphics and create a failure point. The brushes may also cause some scratches in your wrap.

For hand cleaning, use a detergent and water mix with a soft cloth or sponge. Avery Dennison recommends the detergent be a dedicated car wash product or a mild detergent. The detergent should be free from abrasive components, have a pH balance between 3 and 11, and be free from strong solvents or alcohols.

You can hand wash a wrap just like a painted car. The first step is to rinse the vehicle with clean water, this will help avoid scratching the graphics, and then gently agitate a soapy mild detergent and water solution with a soft cloth or a synthetic or natural sponge, starting from the top of the vehicle and working down. Avoid abrading the film surface with unnecessary scrubbing. It is important to rinse the graphic thoroughly with clean water when finished. Allow the water to dry naturally or dab dry with a chamois or a soft non abrasive towel, being careful not to lift the film edges.

If you must use a pressure washer, be sure to follow these guidelines:

  • Keep water pressure below 1200 psi
  • Keep water temperature below 180 degrees F (80 C)
  • Keep the nozzle at least 12 inches away from edges
  • Keep the nozzle perpendicular to the graphic (this will avoid chipping or lifting the edge of the graphics)
  • Use a nozzle with a 40 degree wide angle spray pattern

Excessive pressure or spraying at the wrong angle with a pressure washer can cause damage and create failure points in your graphics.

Another good cleaning option is to use waterless washes to clean a wrap. These products can help maintain the gloss level and performance of the film. If my vehicle is not overly dirty, this is my preferred option. I have found that products, such as Turtle Ice, work well to clean and also put a nice shine on my wrap. If the waterless wash contains wax, do not use it on a matte wrap as that will create glossy spots. Before using any new product on your wrap, be sure to test them in an inconspicuous area of the vehicle before using it on the entire car.

The waterless washes are great options as long as the vehicle isn't too dirty in the first place. For vehicles that are very dirty, it is recommended to wash by hand first then use the waterless wash for your final touches.

For difficult to remove contaminants, such as bird droppings, bug splatter, tree sap, etc., try to soften them by soaking for several minutes with hot, soapy water then rinse thoroughly. If a harsher chemical is needed, be sure to test first in an inconspicuous area. Avoid using abrasive tools that may scratch the graphics.

Can I wax?

As long as the wax does not contain petroleum distillates then, yes, it is OK and encouraged to wax your wrap. Products like Turtle Wax Ice are actually a combination waterless wash and wax and are a great option as long as the vehicle isn't too dirty.

How to Maintain Vehicle Wraps

Matte Films

There are obviously a few exceptions for matte films. You don't want to wax these films because it will fill in the texture and cause shiny spots. For matte films, Aquinil makes a waterless wash that can be used. I have also found that using a 50/50 mix of isopropyl alcohol and water will work well to clean your car. Lighter colors like matte or carbon fiber white are prone to showing more dirt than other colors. If the alcohol and water mix does not cut the dirt, you can try using a hot soapy water solution like we recommended for removing bird droppings and bug splatter, sometimes the soap and water can remove contaminants better than isopropyl alcohol. You can also try an all purpose cleaner such as Simple Green which can be purchased at your local hardware store.

In all cases, we recommend you clean the vehicle in a shaded area. I found that I ended up with more streaks when I cleaned in the sun versus pulling my vehicle into the garage.

Avery Dennison has found that the following products work well. Reference the bottle and see if they are meant to be a waterless wash, wax or waterless wash/wax combination:

Matte Vinyl

Keeping your wrap clean and protecting it with wax will help preserve digitally printed and paint replacement car wraps.

Common FAQs

Miller Decals, LLC holds itself accountable, and adheres to fair and honest business practices. We understand that back soliciting is prohibited. We vow to uphold not only our reputation, but also the reputation of those companies we serve.

We are "for-hire" installers. We do not have the capability to produce or manufacturer. Miller Decals, LLC only provides installation labor to your company.

Laminated vehicle wraps can last up to five years and can be easily peeled off, leaving the original paintwork in pre-wrap condition. While on the vehicle, the vinyl wraps can protect the paintwork from minor scratches, wear and tear, and sun damage.

Vehicle Wraps actually protect a vehicles finish and can be easily removed at any time. Miller Decals, LLC can provide removal of decals and wraps, including the necessary expertise, chemicals, and equipment to do so efficiently.

With over 30 years in business, Miller Decals, LLC has a wide range of experiences from which to draw. We can provide site surveys to measure, photograph, and assess project sites as well as help with ideas for materials or design. We want the job to go smoothly, just like you and your customer.

Miller Decals, LLC will provide ladders, scaffolding, aerial lifts, lighting, and other equipment when necessary. These will be included in the price quoted to you.

Miller Decals, LLC has the most dedicated installation staff. We can help with larger volume projects, rush orders, and after hours or weekend installations.

Our Gallery

Amazing people , outstanding achievements . Would love to go back here!

Toni Ann Erickson, Our Facebook Fan

THINKING ABOUT WRAPPING YOUR VEHICLE? REQUEST A QUOTE HERE!

CERTIFICATIONS

Mactac Authorized Installer Installer
3M
Arlon
Avery CWI
MOB
UASG
knifeless
Paint is Dead
PDAA
wrapitright
lowen
Geek Wraps Certified
Certified Vehicle Wrap Installer